Ecological solutions to avoid the appearance of humidity
Given the problem of moisture in basements and homes, ventilation has become a key factor in preventing their appearance and existence within the spaces, there are many problems that lead to stains and damage to walls and ceilings, uncomfortable environment, extreme feeling.
The renewal of air in these spaces is the standard solution required by law and therefore technicians usually apply it in almost all cases, but what happens when the outside climate is cold and humid and does not interest the customer, we usually have to explain to the owners the need (by law on the one hand, and healthiness on the other) and the convenience of installing air renewal equipment.
There are solutions on the market to alleviate this situation, heat exchangers, ATUs, but among them the provision of IAXXON Energy flat solar air heating collectors can be placed as an efficient and ecological solution when addressing this problem.
HOW DOES IT WORK?
The solar air heating collectors use the same air that is conducted into the rooms as heat transfer fluid. This reduces the relative humidity of the air and introduces what could be called “drier air”.
The increase in temperature (when introduced from the outside to the solar collectors) causes a decrease in the relative humidity of the air introduced into the space to be dehumidified, this “dry air” will be diluted in the interior air absorbing the interior humidity and “drying” the space.
A periodic renewal of all the air in the space will not lead to a drop in the interior temperature, since when it passes through the collectors we will achieve that the air introduced, in addition to being clean from the outside, is hot air, so that we will not waste energy in having to heat the space again.
The installation of this type of collectors does not require more elements or accessories than a traditional ventilation installation. The only modification is to locate the fan forcing the air to the air inlet (the air going through the collectors) instead of the air outlet, thus meeting the requirements of both the RITE and the CTE.
As already mentioned, the installation of this type of Iaxxon Energía panels is similar to traditional panels, both photovoltaic and sanitary hot water, formed by an aluminum structure arranged on a sunny spot. The ducts must meet the specifications set by the RITE to avoid thermal losses and air intake that would reduce the performance of the installation.
In addition, the rate of entry of dry air renewed not only “dry your environment, but provide a comfortable solution to the environment“.
For more information you can contact us by calling 954 856 880 or using the attached form and we will be happy to answer you: